NİVO NEDİR?
Adını Fransızca “niveau(seviye)” den alan nivo, iki nokta arasında kot farkının bulunması ve arazide yüzey nivelmanı yapılarak harita oluşturmaya yarayan genel olarak toprak işleri grubu aletidir. Şantiyelerde en çok kullanılan aletlerin başında gelir. Çalışma prensibi olarak aşağı yukarı yönlü ölçüm yapar.
Nivo Ekipmanları
I. Cihaz(Nivo)
II. Mira: Arazi ve ya bir yapı üzerindeki bir noktanın düşeyini gösteren, yön belirtmek için uzaktan gözlenen, geometrik biçimli latadır. Alüminyum ve tahta versiyonları mevcuttur.
III. Alet sehpası
Nivo Nasıl Kullanılır?
• Sehpa sağlam bir zemine açılır
• Bağlama vidası yardımı ile nivo sehpaya bağlanır
• Üç noktadaki düzeçleme vidaları yardımıyla ortadaki kabarcık merkeze konumlandırılarak şakülüayarlanır
• Nivo 000 derece çevrilerek şakül kontrolü yapılır
• İlk noktadaki mira okuması yapılır (X noktası)
• İkinci noktadaki mira okuması yapılır (Y noktası)
• Miranın şakülde olduğuna dikkat edilmelidir
WHAT IS NIVO?
The level, which takes its name from the French "niveau (level)", is the earthworks group tool used to find the elevation difference between two points and to create a map by leveling the surface in the field. It is one of the most used tools in construction sites. As a working principle, it measures up and down.
Nivo Equipment
I. Device (Nivo)
II. Mira: It is a geometric shaped lath showing the vertical of a point on the land or a building and observed from a distance to indicate direction. Available in aluminum and wood versions.
III.
How is the instrument stand Nivo used?
• The stand opens to a solid floor
• It is attached to the level stand with the help of a fastening screw.
• The plumb is adjusted by positioning the bubble in the center with the help of three-point leveling screws
• The plumb is checked by rotating the nivo 000 degrees • The heir
reading is made at the first point (X point)
• The
heir reading is made at the second point (Y point) • It should be noted that the mira is in the plumb.