Türkçe

Kök lokasyonda olmayan geçici tepkiler için tasarım yapalabilirse, istenen geçici tepkinin tasarımındaki esneklik artırılabilir. Şekil 0.0(a) bu kavramı göstermektedir. Aşırı atış yüzdesi ve yerleşme süresi ile tanımlanan arzu edilen geçici tepkinin B noktası ile temsil edildiğini varsayalım. Ne yazık ki, belirlenen aşma yüzdesindeki mevcut kök yer eğrisinde, yalnızca basit bir kazançtan sonra A noktasıyla temsil edilen yerleşme süresini elde edebiliriz.ayarlama. Bu nedenle amacımız, aşma yüzdesini etkilemeden A'daki yanıtı B'nin yanıtına hızlandırmaktır. Hızdaki bu artış basit bir kazanç ayarıyla gerçekleştirilemez çünkü B noktası kök yer üzerinde yer almamaktadır. Şekil 0.0(b), aradığımız geçici yanıttaki iyileşmeyi göstermektedir: Daha hızlı yanıt, daha yavaş yanıtla aynı aşma yüzdesine sahiptir.

https://cevirsozluk.com/

İngilizce

If design can be made for transient responses that are not at the root location, flexibility in the design of the desired transient response can be increased. Figure 0.0(a) illustrates this concept. Assume that the desired transient response, defined by overshoot percentage and settling time, is represented by point B. Unfortunately, in the current root locus curve at the specified overshoot percentage, we can only obtain the settling time represented by point A after a simple gain. adjustment. Therefore, our goal is to accelerate the response at A to the response of B without affecting the overshoot percentage. This increase in speed cannot be achieved by a simple gain adjustment because point B is not located on the root locus. Figure 0.0(b) shows the improvement in transient response we are looking for: The faster response has the same overshoot percentage as the slower response.

https://cevirsozluk.com/

(5000 karakter kaldı)
Türkçe
İngilizce

İçindekiler

,0, 0 ,, 0,, 0., 0'ın, 0a, 0e, 0er, , 0i, 0r, 0u, , a 0

Son çeviriler

devamını göster›
ADS - REKLAMLAR